When some friends use the slewing bearing, because they do not know the correct operation method or do not pay attention to some details, the equipment often fails, affecting the normal use. So how to reduce the failure rate of slewing bearing?
1. Pay attention to the use of lubricating oil when using the slewing bearing. Once it is found that the equipment lacks lubricating oil, it must be replenished in time. Because when the lubricating oil is insufficient, the friction force will increase and the resistance will become larger, so the operation of the bracket may become inflexible. When adding lubricating oil, the slewing bearing factory reminds everyone to add lubricating oil of the same specification or replace all lubricating oils.
2. Before and after the use of the slewing bearing, observe the condition of the sealing strip at any time to see if it is damaged; if the sealing strip is damaged, it must be replaced in time, otherwise foreign matter will enter the raceway. Foreign objects should be removed in time; at the same time, if the working conditions are relatively poor, dust will also penetrate into the raceway, and everyone needs to clean it up in time.
3. During the operation of the bearing, if the gear is found to be deformed or broken, it should be dealt with in time, otherwise it may cause stuck or difficult operation;
The above describes how to reduce the failure rate of the slewing bearing. When using the bearing, it must be operated in strict accordance with the specified requirements, and at the same time, abnormal problems should be detected in time; especially, the lubricating oil should be added regularly. If any deformed or damaged parts are found, they must be replaced or repaired.
